Equipment preparation guide
R-Corner Glass Grinding: Sample and Acceptance Checklist
Prepare the drawing, glass samples, process conditions and measurement record needed to review optional R-corner grinding and polishing.
Separate the three requirements on the drawing
| Requirement | What it describes | Specify |
|---|---|---|
| Straight-edge grinding | Finishing an edge along the straight side of the panel | Edge profile, stock removal, appearance and dimensional criteria |
| Edge chamfering or arrissing | The bevel or arris along the glass edge | Width, angle and required finish |
| Radius corner in the panel outline | The curved outline joining adjacent sides | Radius, corner locations, adjacent straight edges and dimensional datum |
Hinge holes, cut-outs and outer radius corners are different drawing features. Identify each requirement separately.
Define the sample before the trial
Provide a drawing revision and representative glass samples with an ID, material, processing stage, thickness and panel dimensions. Identify which corners require processing and which edges must be polished.
The BYAA series lists optional R3–R8 corner processing. Confirm the selected model, wheel configuration and material against your sample rather than treating that range as a specification for every machine.
Keep a usable trial record
| Record | Include |
|---|---|
| Sample identity | Sample ID, drawing revision, material, thickness, dimensions and corresponding photographs |
| Equipment configuration | Machine model, wheel sequence, corner option and polishing setup |
| Processing conditions | Stock removal, actual speed settings, handling, format changes and measured cycle |
| Acceptance method | Measurement tools and points, sampling method and agreed radius, dimensional and appearance criteria |
| Results and limits | Measured results, accepted items, adjustments still needed and the glass range represented by the trial |
Questions before accepting a sample
Is maximum edging speed the R-corner cycle?
Confirm the actual cycle with the corner function enabled. Radius, thickness, stock removal, polishing and handling all belong in the trial conditions.
Can a photograph establish radius or dimensional acceptance?
Photographs help communicate appearance and edge shape. Measure radius, dimensions and tolerances using the agreed method and link the results to the sample ID.
Does the Korean customer video demonstrate R-corner capability?
That customer uses standard double edging lines without R-corner grinding. The video shows the equipment running at the customer factory; corner capability requires the corresponding machine and sample record.
Related equipment and documents
R-corner process requirements
Define radius, edge finish and the selected machine option separately.
Review R-cornersBYAA BUT Series
Published series data and optional R-corner configurations.
View the lineKorean customer factory operation
Standard double edging equipment installed at a customer factory, without R-corner grinding.
View the customer caseContinue your preparation
Choose a double edging machine or line
Compare BYAA, BYS4525 and a standalone unit against your glass and handling setup.
Read the selection guidePrepare your factory layout
Map glass flow, utilities, installation access and upstream and downstream interfaces.
Read the layout checklistRecord glass edging chips
Collect defect photographs and operating records for a useful discussion with a technician.
Read the recording guideDiscuss your processing requirements
Send your glass drawing, thickness, panel sizes, required output and existing handling arrangement. We will review the suitable configuration and the information still needed.